The guidelines below are general guidelines. If you have questions or concerns that are not specifically addressed below, please contact us via our Connect With Us page or call us at 877-205-0661.
Submitting Your Logo
Currently, most items are available with a single color imprint, unless full-color digital printing is indicated. When submitting your logo, be sure it is sharp and a high-resolution file. For one-color printing, we can usually convert the file to print one-color. If you're purchasing items indicating full-color digital printing, upload a sharp, high-resolution color logo.
Supported File Types
We can pretty much use or convert most files. A high-resolution JPEG, TIFF, PDF usually works best. If you cannot create or access this file type, send over what you have and we should be able to work things out. How can you tell if the file resolution is high enough? Generally, you can enlarge the image two to three times bigger than how it might be printed on the selected item. The image should be very sharp. If the image appears to be very fuzzy, or pixelated, chances are the resolution is not going to yield the best result.
Design configuration and intricately detailed logos?
When choosing to use your logo for imprint, be sure to keep in mind that the logo will undergo a considerable reduction depending on the item. Additionally, consider that if your logo is more of a height design, it may not be a good fit for printing on long slender golf tees. Shoot us an e-mail with any questions you may have.
Examples of logos that work very well for our ball markers and repair tools.Examples of logos that work very well for elongate golf tees.
What are the imprint areas? (Some items listed below may no longer be available.)
Tee length: 2 1/8” - 1” x 1/2” imprint area
Plastic divot repair tools: 1-1/16” x 5/8”
Pencils (round) - 1 3/4” x 3/4”
Matchbook - 2-1/4” x 2”
Golf Towels - 18” x 11” - 11” x 7”
Golf Towels - 16” x 24” - 11” x 16”
Umbrellas - 7” x 6”
Utility Brush- 1 1/2” x 1/2”
Softspikes™ Push Tool- 1-3/8” x 1/4”